Access Harry Potter Movie Series on Netflix Anywhere with a VPN

How to Change IP Address on Windows 10[ Canadian Guide]

Windows 10 image

 

Short on time?

  1. IP settings using settings application GUI.
  2. IP settings using CP(Control Panel).
  3. IP settings using CMD (Command prompt).

Changing the Internet Protocol (IP address) in Windows operating system is a common issue. It can be done from many different places, but it’s important to know what each one does so you don’t do more harm than good! In this article, we will discuss how to change the (Internet Protocol) address with Control Panel (CP) and Command Prompt (CMD). The steps are well explained for how to change the IP address on Windows 10.

NOTE: You need to log in with the administrator rights before changing your IP address(Internet Protocol), it would be a plus if you know how to find your IP address.

Express VPN

Click heare to check more plansExpressVPN

 

Nord VPN

Click heare to check more plansNordVPN

 

CyberGhost VPN

Click heare to check more plansCyberGhost

 

surfshark

Click heare to check more plansSurfShark

How to change the IP address on Windows 10( Settings)

step1

To change the IP address in Windows 10 OS, access it from the Settings window.

Open Settings by pressing Windows + i.

 

setting app

step2

When you are connected to an internet network, open Settings. Choose network from either Wi-Fi or Ethernet from the left sidebar menu.

 

setting app

step 3

Select the network you’re connected to.

 

setting app

step 4

Look for the network details. After that, you’ll see an option labeled as IP settings. Now click on the Edit button.

 

setting app

step 5

A dialogue box will appear.” This way you can easily change the Internet Protocol IP address of a laptop or PC.

setting app

step 6

If you wish to manually set a static IP (Internet Protocol) address and use both IPv4 and IPv6, select the manual setting in the left-hand menu.

 

setting app

 

Select IPv4 or IPv6 IP (Internet Protocol) after selecting Manual and carefully enter the IP details.

step 7

  • To set a static IP address, you need to insert/enter the specific details:
  • Fill in a static IP address (Internet Protocol) that you need to use in windows 10 like 192.168.60.10.
  • Subnet: Enter the subnet mask.

Gateway: Fill in your router’s IP  for example 192.169.60.1 (or whatever your network gateway is).

 

setting app

 

For changing DNS and the alternate DNS, you will need to fill in all the top 3 sections. Once saved, your IP(Internet Protocol) address is modified by Windows and preferred DNS, as well as alternate DNS, will be automatically filled.

 

setting app

 

NOTE: After entering a static (Internet Protocol) IP address, keep one thing in mind the details are accurate. Otherwise, your computer will lose internet connectivity. To counter this issue, revert your IP to (DHCP) and then the router can assign an alternative and effective one.

 

How to change IP address in Windows 10 (Control panel)

The interface of Windows 10 is super easy and a user can easily change the IP address using the Control panel’s settings as well. Open your Control Panel & navigate to Network & Internet option.

 

control panel

 

Open the “Network & Sharing Center” then check your active internet.

 

control panel

 

In a new pop-up window click the properties.

 

control panel

 

 

After that click the Internet protocol(TCP/IPv4) /(TCP/IPv6) as per your needs.

 

control panel

 

Click on Properties.

control panel

 

 

Either you choose (TCP/IPv4 or TCP/IPv6) by clicking the properties you’ll be able to change the IP address.

 

control panel

 

The IP address settings window allows an option for a dynamically assigned IP address, but it’s only available when checking the “Obtain automatically” box.

 

control panel

 

If you need to change your IP address in Windows 10, either through Settings or by using the command line, enter the details such as subnet mask, default gateway, and IP address. Finally, click OK to save your settings.

 

 

How to change IP address in Windows 10 (CMD or Powershell)

If you work primarily in a CMD command-line, you can change the (Internet Protocol) IP address on your Windows 10 computer with either CMD or Powershell. If you’re not sure which console is most appropriate for you to use, run the command” netsh interface IP show config”. The results will display your network details then you can change your IP address against the Network adapter you’ve identified.

 

command prompt

 

 

If you would like to use a dynamic IP address for your network connection run the command netsh interface IP set address followed by “Network Name” dhcp.  You need to type your network name like netsh interface ip set address “Wi-Fi” dhcp.

 

command prompt

 

 

For static IP run the command netsh interface IP set address name= “” Network Interface Name” static [IP Address] [Subnet Mask] [Gateway]. Enter all the valid details.

 

command prompt

 

FAQ

Changing IP address on Windows 10 operating system is fairly easy, just follow the steps mentioned below:

  1. Open the settings application.
  2. Navigate to Network and Internet.
  3. Click on the Wi fi option in the side menu.
  4. Click on edit below the IP assignment.
  5. Edit network IP settings to Automatic DHCP and click SAVE.
  6. Switch on the IPV4 toggle.
  7. Enter your new IP address information and click save.


Open the command prompt from the start menu. Type ipconfig/ release in the command prompt hit enter and it will release the IP configuration. Finally, type ipconfig/ renew and wait for some time, the DHCP server will assign a new IP address for your computer.

  1. Open CMD from the start menu.
  2. Type ipconfig/release in the command prompt.
  3. Finally, type ipconfig/ renew and hit enter.


If your device is currently connected to the internet then it is possible to change the IP address from the router panel or from the device. Type the below commands in the command prompt window if you don’t want to use a VPN.

  1. ipconfig/ release
  2. ipconfig/renew


It is very easy to find your IP address on windows 10:

  1. Open the settings application.
  2. Navigate to Network and Internet.
  3. Then click on wifi from the side menu and select the network you’re connected to.
  4. Under properties check for the IPV4 label, your IP address will be mentioned next to it.


Your answer here

Wrapping up

 

Now you’re familiar with 3 different ways to change your IP address in the windows operating system and we have also guided you regarding static and dynamic IP address changes. These are the most common and legit methods used by IT professionals and daily users for their work or business needs. We believe after reading the above guide you will be pretty confident about how to change the IP address on windows 10.